To enable IGMP proxying:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5. Clear the Disable IGMP Proxying check box.
By default, the Disable IGMP Proxying check box is selected and IGMP proxying is disabled.
6. Click the Apply button.
Your settings are saved.
Manage the LAN IP Address Settings
The modem router is preconfigured to use private IP addresses on the LAN side and to act as a DHCP
server.The modem router’s default LAN IP configuration is as follows:
• LAN IP address. 192.168.0.1 (this is the same as www.routerlogin.net)
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks and are
suitable for most applications.The IP address and subnet mask identify which addresses are local to a
specific device and which must be reached through a gateway or modem router.You might want to change
these settings if you need a specific IP subnet that one or more devices on the network use, or if competing
subnets use the same IP scheme.
To change the LAN IP address settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
Manage the WAN and LAN Network Settings
145
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2
To Next Page
Loading...
Need help?
General
