Name: NETGEAR Nighthawk AC1900 D7000v2
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

USB Device Requirements

The modem router works with most USB-compliant external flash and hard drives. For the most up-to-date

list of USB devices that the modem router supports, visit kbserver.netgear.com/readyshare.

Some USB external hard drives and flash drives require you to load the drivers onto the computer before

the computer can access the USB device. Such USB devices do not work with the modem router.

The modem router supports the following file system types for full read/write access:

• FAT16

• FAT32

• NTFS

• NTFS with compression format enabled

• Ext2

• Ext3

• Ext4

The modem router supports the following file system types with read-only access:

• HFS

• HFS+

Connect a USB Device to the Modem Router

ReadySHARE lets you access and share a USB device that is connected to a USB port on the modem

router. (If your USB device uses special drivers, it is not compatible.) One USB port is on the left side panel

of the modem router and another is on the right side panel.

Each side panel provides one USB 3.0 port. The left side panel contains USB port 1.The right side panel

contains USB port 2.

Figure 8. USB port on the modem router

Share a Storage Device

115

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

Questions and Answers:

Need help?

Do you have a question about the NETGEAR Nighthawk AC1900 D7000v2 and is the answer not in the manual?

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General