Need help?Do you have a question about the NETGEAR Nighthawk AX6 Series and is the answer not in the manual?
General| Beamforming | Yes |
|---|---|
| MU-MIMO | Yes |
| Model | RAX50 |
| OFDMA | Yes |
| Processor | 1.5 GHz quad-core |
| USB Ports | 1 x USB 3.0 |
| Security | Supports WPA3 |
| Memory | 512MB DDR3 RAM |
| WiFi Technology | Wi-Fi 6 (802.11ax) |
| Antenna | 4 x external antennas |
Details the contents of the router package, including the router, power adapter, antennas, and Ethernet cable.
Explains the function and status indications of the router's top panel LEDs and buttons.
Identifies and describes the connectors and buttons located on the rear panel of the router.
Provides recommendations for positioning the router to optimize WiFi network range and performance.
Explains how to establish a wired or WiFi connection to the router.
Guides users on accessing the router's web interface for configuration.
Information on using the Nighthawk mobile app for router installation and management.
Step-by-step guide to automatically configure the router's internet connection.
Detailed instructions for manually configuring various internet connection types.
Procedures for setting up different types of IPv6 internet connections.
How to configure rules to allow or block internet access for devices.
Method to block specific websites by entering keywords or domain names.
Set up time-based rules to block internet sites and services.
Configure Wide Area Network (WAN) parameters like MTU and DMZ.
Configure WiFi network name (SSID), security, and broadcast options.
Steps to change the WiFi network password and security type.
Create a separate, isolated WiFi network for guests.
Configure the router to operate as a network bridge.
Configure Quality of Service (QoS) to prioritize internet traffic.
Enable Universal Plug and Play (UPnP) for device network discovery.
Instructions for checking and installing firmware updates for the router.
Procedure to change the router's administrative login password.
Options for backing up, restoring, or erasing router settings.
Steps to reset the router to its original factory default configuration.
How to physically connect a USB storage device to the router's USB port.
Instructions for accessing USB storage connected to the router from a Windows computer.
Instructions for accessing USB storage connected to the router from a Mac computer.
Configure Dynamic DNS service for remote access to the network.
Overview of accessing router-attached USB storage devices over the internet.
General steps for establishing a Virtual Private Network (VPN) connection.
Instructions for installing OpenVPN client software on various devices.
Detailed guide for establishing a VPN tunnel from a Windows computer.
Configure rules to forward specific incoming internet traffic to local servers.
Explains port triggering and its dynamic port opening capabilities.
General troubleshooting advice and sequence for restarting the network.
Diagnose issues by interpreting the status of the router's LEDs.
Steps to resolve problems when the router is connected but the internet is inaccessible.
Details default router settings and procedures for resetting to factory defaults.
Provides detailed technical specifications of the router hardware and features.
To Next Page