NETGEAR Nighthawk AX6 Series User Manual

Wall-Mount Your Router
You can wall-mount your router using the wall-mounting holes on the bottom of your
router.
Note: We recommend using M3 x 20 mm screws.
Figure 6. Bottom of the router
To wall-mount your router:
1. Drill holes in the wall where you want to wall-mount your router.
2. Insert wall anchors in the holes.
3.
Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed.
4. Align the router’s wall-mounting holes with the screws and mount your router.
User Manual15Hardware Setup
Nighthawk AX6 6-Stream AX4300 WiFi Router

NETGEAR Nighthawk AX6 Series Specifications

General

Beamforming	Yes
MU-MIMO	Yes
Model	RAX50
OFDMA	Yes
Processor	1.5 GHz quad-core
USB Ports	1 x USB 3.0
Security	Supports WPA3
Memory	512MB DDR3 RAM
WiFi Technology	Wi-Fi 6 (802.11ax)
Antenna	4 x external antennas