EasyManuals Logo

NETGEAR Nighthawk AC1900 D7000v2 User Manual

NETGEAR Nighthawk AC1900 D7000v2
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
(Continued)
DescriptionField
Your ISP uses DHCP to assign your DNS servers.Your ISP automatically
assigns this address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS addresses
to the modem router during login, select this option and enter the IP address
of your ISP primary DNS server. If secondary and tertiary DNS server
addresses are available, enter them also.
Use These DNS Servers
Router MAC Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC
address of the network interface card in your computer when your account is first opened.They accept traffic
only from the MAC address of that computer.
This feature allows your modem router to use your computer’s MAC address (also called cloning).
Use the default MAC address.Use Default Address
The modem router captures and uses the MAC address of the computer that
you are now using.You must use the one computer that is registered by the
ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field displays
the MAC address of the Internet port.
Use This MAC Address
DHCP Options
Enter the vendor class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI string, leave this field blank.
Vendor Class Identifier String
(option 60)
Enter the client identifier (client ID) string, as indicated by your ISP.
If your ISP did not provide you with a client ID string, leave this field blank.
Client Identifier String (option
61)
12. Click the Apply button.
Your settings are saved.
13. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the Internet Connection
on page 203.
Specify an ADSL Connection With a Login and PPPoA or PPPoE
Service
If you want to manually configure the ADSL connection settings, use the information that your ISP gave you
to log in and connect to your Internet service. If you cannot find this information, contact your ISP. Entering
incorrect information might prevent the modem router from connecting to the Internet.
Manage the Internet Settings Manually
39
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AC1900 D7000v2 and is the answer not in the manual?

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General IconGeneral
WiFi PerformanceAC1900 (600 + 1300 Mbps)
WiFi RangeLarge homes
Memory128 MB Flash and 256 MB RAM
Frequency Band2.4GHz and 5GHz
Beamforming+Yes
Smart ConnectYes
Guest NetworkYes
VPN SupportYes
Parental ControlsYes
Quality of Service (QoS)Yes
WiFi Technology802.11ac
Number of Ethernet Ports4 x Gigabit Ethernet
Number of USB Ports2 (USB 2.0 and USB 3.0)
ProcessorDual-core 1GHz
Security FeaturesWPA/WPA2
Wireless Standard802.11 a/b/g/n/ac
Ports4 Gigabit Ethernet, 2 USB
Modem TypeVDSL/ADSL

Related product manuals