5. Select the Enable VPN Service radio button.
6. Scroll down to the Clients will use this VPN connection to access section, and select the All sites on
the Internet & Home Network radio button.
When you access the Internet with the VPN connection, instead of using a local Internet service, you
use the Internet service from your home network.
By default, the Auto radio button is selected, which lets the modem router use an
automatic detection system that enables VPN access only for necessary services
and sites and might not include full Internet access.
Note
7. Click the Apply button.
Your settings are saved.
8. Click the For Windows or For non-Windows button and download the configuration files for your VPN
clients.
9. Unzip the configuration files and copy them to the folder where the VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at C:\Program
files\OpenVPN\config\ by default.
Block VPN Client Internet Access in the Modem Router
By default, the modem router is set up to allow VPN connections only to your home network, not to the
Internet service for your home network. If you changed this setting to allow Internet access, you can change
it back.
To allow VPN clients to access only your home network:
1. Launch a web browser from a computer or mobile device device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VNP page displays.
5. Make sure that the Enable VPN Service radio button is selected.
6. Scroll down to the Clients will use this VPN connection to access section, and select the Home Network
only radio button.
7. Click the Apply button.
Your settings are saved.
Use VPN to Access Your Network
186
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2
To Next Page
Loading...
Need help?
General
