To enable FTP access within your network:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ReadySHARE.
The USB Storage (Basic Settings) page displays. By default, the Basic radio button is selected.
5. Click the Edit button.
6. Select the FTP check box.
7. Click the Apply button.
Your settings are saved.
View Network Folders on a Device
You can view the network folders on a USB storage device connected to the modem router.
To view network folders:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ReadySHARE.
The USB Storage (Basic Settings) page displays. By default, the Basic radio button is selected.
5. Click the Edit button.
The USB Storage (Advanced Settings) page displays.
6. The Available Networks Folder section shows the following settings:
• Share Name.The default share name is USB_Storage.
• Read Access and Write Access. The permissions and access controls on the network folder.
All–no password (the default) allows all users to access the network folder.The password for admin
is the same one that you use to log in to the modem router.
Share a Storage Device
122
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2
To Next Page
Loading...
Need help?
General
