EasyManuals Logo

NETGEAR Nighthawk AC1900 D7000v2 User Manual

NETGEAR Nighthawk AC1900 D7000v2
215 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
View, Establish, or Terminate the PPPoE or PPPoA Internet
Connection
You can view information about a PPPoE or PPPoA Internet connection of the modem router and establish
or terminate such a connection. This information displays only if the modem router connects to the ISP
network over a PPPoE or PPPoA connection. A PPPoE connection can function over an ADSL, VDSL, or
cable connection. A PPPoA connection can function only over a VDSL connection.
To view the status of the PPPoE or PPPoA Internet connection or establish or terminate the
PPPoE or PPPoA Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Internet Port pane, click the Connection Status button.
The Connection Status pop-up window opens.The fields that display depend on the type of Internet
connection.
The following table describes the fields for a PPPoE connection.
DescriptionField
The time elapsed since the connection was established.Connection Time
The status can be Connected or Disconnected.Connection Status
The negotiation can be a series of dashes, which indicates that the connection is not
established, or successful (Success).
Negotiation
The authentication can be a series of dashes, which indicates that the connection is
not established, or successful (Success).
Authentication
The IP address that is assigned by the ISP to the modem router.IP Address
The subnet mask that is assigned by the ISP to the modem router.Subnet Mask
6. To establish the Internet connection when the connection is down, click the Connect button.
7. To terminate the Internet connection when the connection is active, click the Disconnect button.
8. Click the Close Window button.
The pop-up window closes.
Manage the Modem Router and Monitor the Traffic
169
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000v2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AC1900 D7000v2 and is the answer not in the manual?

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General IconGeneral
WiFi PerformanceAC1900 (600 + 1300 Mbps)
WiFi RangeLarge homes
Memory128 MB Flash and 256 MB RAM
Frequency Band2.4GHz and 5GHz
Beamforming+Yes
Smart ConnectYes
Guest NetworkYes
VPN SupportYes
Parental ControlsYes
Quality of Service (QoS)Yes
WiFi Technology802.11ac
Number of Ethernet Ports4 x Gigabit Ethernet
Number of USB Ports2 (USB 2.0 and USB 3.0)
ProcessorDual-core 1GHz
Security FeaturesWPA/WPA2
Wireless Standard802.11 a/b/g/n/ac
Ports4 Gigabit Ethernet, 2 USB
Modem TypeVDSL/ADSL

Related product manuals