10
7. Select a WiFi network to extend and click the NEXT button.
If you do not want to extend both WiFi bands, clear the 2.4GHz WiFi
Networks or the 5GHz WiFi Networks checkbox.
8. In the Password (network key) field, type the existing WiFi network
password (also called passphrase or security key) and click the NEXT
button.
9. Set the network name (SSID) and password for your extender and
click the NEXT button.
Note: We recommend that you use a dierent network name (SSID)
for your extender than the network name (SSID) that your router
uses.
Wait for the page to display a list of new extender WiFi networks,
which might take up to one minute.
10. Connect your WiFi-enabled device to the new extender WiFi network
using the extender SSID and password that you created in Step 9.
11. Make sure that your WiFi-enabled device is successfully connected
before you click the CONTINUE button.
12. Click the CONTINUE button.
A message displays confirming that the extender is connected to the
new extender WiFi network.
13. Click the NEXT button.
The registration page displays.
To Next Page
Loading...
