9
Connect With the NETGEAR Installation Assistant
1. Connect your device to the extender using a wired Ethernet or WiFi
connection:
• To connect with a wired Ethernet connection, use an Ethernet
cable to connect the Ethernet port on the extender to an
Ethernet port on your computer.
• To connect with WiFi, on your WiFi-enabled device, open the
WiFi connection manager and locate and connect to the extender
network called NETGEAR_EXT.
After the connection with your WiFi-enabled device is established, the
Client Link LED lights.
2. Launch a web browser.
3. Enter www.mywifiext.net in the address field of the browser.
The New Extender Setup page displays.
4. Click the NEW EXTENDER SETUP button.
The Create Account page displays.
5. Complete the fields on the Create Account page and click the NEXT
button.
6. Click the WIFI RANGE EXTENDER button.
The extender scans for WiFi networks in your area and displays a list.
To Next Page
Loading...
