3
Join the WiFi Network
You can either use Wi-Fi Protected Setup (WPS) or select your router’s
WiFi network and type its password.
Join the WiFi Network Using WPS
For help with the WPS button on your WPS-enabled device, check the
instructions or online help that came with that computer or device. Some
older equipment cannot use WPS.
¾ To join the network using WPS:
1. Press the WPS button on the router for three to five seconds.
The WPS LED on the router blinks.
2. Within two minutes, on your WPS-enabled device, press its WPS
button or click its onscreen WPS button.
The WPS LED on the router lights solid white when the WPS-enabled
device connects to your router.
3. Repeat this process to add other WPS-enabled devices.
To Next Page
Loading...
