Need help?Do you have a question about the NETGEAR Orbi Pro Ceiling Satellite and is the answer not in the manual?
General| Category | Wireless Router |
|---|---|
| Mounting Type | Ceiling |
| MU-MIMO | Yes |
| Beamforming | Yes |
| Parental Controls | Yes |
| Guest Network | Yes |
| Antenna Type | Internal |
| PoE Support | Yes |
| Wireless Standard | 802.11ac |
| Frequency Band | Dual-band (2.4 GHz & 5 GHz) |
| Maximum Speed | 3000 Mbps |
| Ethernet Ports | 1 x Gigabit Ethernet |
| Security | WPA/WPA2 |
| Compatibility | Orbi Pro Routers |
Lists compatible Orbi Pro routers and satellites for the ceiling satellite.
Details the items included in the product package.
Identifies and describes the physical components and ports of the satellite.
Explains the behavior and meaning of the Power LED indicator.
Explains the behavior and meaning of the LED bar indicator.
Describes the information found on the satellite's identification label.
Provides instructions for installing the satellite on a ceiling or wall.
Detailed steps for mounting the satellite on a drop ceiling.
Detailed steps for mounting the satellite on a wall.
Guides on how to sync the satellite with the Orbi Pro router.
Specific steps for syncing the satellite using its physical sync button.
Specific steps for syncing the satellite via the router's web interface.
Instructions for configuring the Orbi Pro network using the mobile app.
Details how to update the firmware for the satellite and router.
Explains how to re-enable the satellite's sync button if disabled.
Instructions to turn the satellite's LEDs on or off.
Guide to rename the satellite for network identification.
How to view satellite status and network info via the router web interface.
How to view detailed satellite status via its own web interface.
Steps to restore the satellite to its original factory settings.
Explanation of link aggregation for increased throughput or redundancy.
Troubleshooting steps for login problems with the router web interface.
Solutions for when the router and satellite fail to sync.
Diagnosing and resolving the issue when the Power LED blinks red.
Troubleshooting solid red Power LED when using PoE power.
Addresses network disruptions caused by link aggregation configuration.
Lists the default network and system settings for the device.
Provides detailed technical specifications of the Orbi Pro Ceiling Satellite.
To Next Page