EasyManuals Logo

NETGEAR Orbi RBR350 User Manual

NETGEAR Orbi RBR350
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Set up a VPN connection
A virtual private network (VPN) lets you use the Internet to securely access your network
when you aren’t home.
This type of VPN access is called a client-to-gateway tunnel. The computer is the client,
and the router is the gateway. To use the VPN feature, you must log in to the router and
enable VPN, and you must install and run VPN client software on the computer.
VPN uses DDNS or a static IP address to connect with your router.
To use a DDNS service, register for an account with a host name (sometimes called a
domain name). You use the host name to access your network. The router supports
these accounts: NETGEAR, No-IP, and Dyn.
If your Internet service provider (ISP) assigned a static WAN IP address (such as 50.196.x.x
or 10.x.x.x) that never changes to your Internet account, the VPN can use that IP address
to connect to your home network.
Specify VPN service in the router
You must specify the VPN service settings in the router before you can use a VPN
connection.
To specify the VPN service:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
5. Select the Enable VPN Service check box.
By default, VPN uses the UDP service type with port number 12973 for TUN mode
and port number 12874 for TAP mode. If you want to customize the service type,
mode, and port, we recommend that you change these settings before you install
the OpenVPN software.
User Manual105Use VPN to Access Your Network
Orbi WiFi 6 Dual-band Mesh System

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Orbi RBR350 and is the answer not in the manual?

NETGEAR Orbi RBR350 Specifications

General IconGeneral
Antenna typeInternal
Product colorWhite
LED indicatorsYes
Antennas quantity2
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Top Wi-Fi standardWi-Fi 6 (802.11ax)
Security algorithms128-bit AES, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA3
WLAN data transfer rate (first band)600 Mbit/s
WLAN data transfer rate (second band)1200 Mbit/s
Number of products included1 pc(s)
Ethernet LAN (RJ-45) ports3
Internal memory512 MB
Processor cores4
Virtual assistantAmazon Alexa & Google Assistant
Processor frequency1.8 GHz
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth60.96 mm
Width144.78 mm
Height177.8 mm
Weight662.24 g

Related product manuals