NETGEAR Orbi RBW30 User Manual

7.
To turn the LED lighting off, in the LED On/Off section, click the On button.
The top and bottom Light LEDs turn off.
8. Click the APPLY button.
Your settings are saved.
Set LED lighting brightness
After you turn on the satellite’s LED lighting, you can set its brightness percentage.
To set the satellite’s LED lighting brightness:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The Attached Devices page displays.
5. Select your satellite.
The Edit Device page displays.
6.
Make sure that the LED On/Off slider is set to ON.
7.
If the LED lighting is turned off, click the LED On/Off slider to turn the LED on.
The top and bottom Light LEDs turn on.
8.
Select an LED lighting brightness percentage from the LED Lighting Brightness
menu.
9. Click the APPLY button.
Your settings are saved.
Schedule when to turn on LED lighting
You can schedule when to turn on the satellite’s LED lighting:
User Manual103Manage Your Network
Orbi WiFi System

NETGEAR Orbi RBW30 Specifications

General

Brand	NETGEAR
Model	Orbi RBW30
Category	Network Router
Language	English