NETGEAR R7500 Quick Start

9
3. Enter admin for the user name and password for the
password.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Set Password.
5. Type your old password and type the new password twice.
6. To be able to recover the password, select the Enable
Password Recovery check box.
NETGEAR recommends that you enable password recovery.
7. Select two security questions and provide answers to them.
8. Click the Apply button.
Your changes are saved.
Recover a Forgotten admin Password
The default password for the admin user name is password. If you
changed the password and enabled the password recovery feature,
you can retrieve this password.
¾ To retrieve a forgotten admin password:
1. Launch a web browser.
2. Enter www.routerlogin.net in the address field of the
browser.
A login screen displays.
3. Click the Cancel button.
If password recovery is enabled, you are prompted to enter the
serial number of the router. The serial number is on the product
label.
4. Enter the serial number of the router.
The serial number is on the product label.
5. Click the Continue button.

NETGEAR R7500 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC2350 (600 + 1733 Mbps)
Number of Ethernet Ports	5
Antenna	4 external antennas
Beamforming+	Yes
Dynamic QoS	Yes
MU-MIMO	Yes
VPN Support	Yes
WiFi Band	Dual Band 2.4GHz and 5GHz
Ethernet Ports Speed	Gigabit (10/100/1000 Mbps)
Processor	1.4GHz dual-core processor
Memory	512 MB RAM
Security	WPA/WPA2—PSK
Dimensions	11.22 x 7.26 x 1.97 in