11
Prioritize with Dynamic Quality of Service
Dynamic Quality of Service (QoS) helps improve your router’s
Internet trac management capabilities through better application
and device identification, bandwidth allocation, and trac
prioritization techniques. Dynamic QoS resolves trac congestion
when you have limited Internet bandwidth and competing demands.
If your Internet download and upload speed is 250 Mbps or less
and you like gaming and streaming video, then you can benefit from
enabling Dynamic QoS.
Note: If you use a gigabit Internet connection, or your Internet
download and upload speed is 300 Mbps or faster, then you don’t
need to use Dynamic QoS.
¾ To enable Dynamic QoS:
1. Launch a web browser.
2. Enter www.routerlogin.net in the address field of the
browser.
A login screen displays.
3. Enter the router user name and password.
The user name is admin and the default password is password.
You can use the default credentials if you did not change them.
The BASIC Home screen displays.
4. Select Dynamic QoS.
The Dynamic QoS screen displays:
5. Select the Enable Dynamic QoS check box.
6. Specify your Internet bandwidth.
You must specify your Internet bandwidth so that Dynamic QoS
can perform bandwidth allocation and trac prioritization.
To Next Page
Loading...
Need help?
General
