NETGEAR R7500 Quick Start

3
2. Prepare your modem.
a. Unplug your modem’s power.
b. If the modem has a battery backup, remove its batteries.
c. If your modem was already connected to another router,
disconnect the cable between your modem and that router.
Make sure that your modem is turned o and is cabled only to
the wall jack for your Internet service.
3. Connect your modem.
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With the yellow Ethernet cable that came with the router,
connect your modem to the yellow Internet port on your
router.
Modem
DSL or cable
Internet
Router
Ethernet cable
Modem
Internet
DSL or
cable

NETGEAR R7500 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC2350 (600 + 1733 Mbps)
Number of Ethernet Ports	5
Antenna	4 external antennas
Beamforming+	Yes
Dynamic QoS	Yes
MU-MIMO	Yes
VPN Support	Yes
WiFi Band	Dual Band 2.4GHz and 5GHz
Ethernet Ports Speed	Gigabit (10/100/1000 Mbps)
Processor	1.4GHz dual-core processor
Memory	512 MB RAM
Security	WPA/WPA2—PSK
Dimensions	11.22 x 7.26 x 1.97 in