NETGEAR R8000P Quick Start

3
3. Connect your modem.
a. Plug in, then turn on your modem.
b. If you removed the batteries, replace them.
c. With the yellow Ethernet cable that came with the router,
connect your modem to the yellow Internet port on your
router.
4. Check the router’s LED On/O switch.
If the LED On/O switch on the rear panel of the router is
in the o position, slide the LED On/O switch to the on
position.
DSL or
cable
Modem
Internet
Router
Ethernet
cable
LED On/O switch

NETGEAR R8000P Specifications

General

Brand	NETGEAR
Model	R8000P
Category	Wireless Router
Language	English