Contents Overview
Router
1
2
3 4 5
A B
ED
C
WPS button
Reset button
1
Power LED
4
Ethernet LED
Internet port
Power On/Off button
2
Internet LED
5
WPS LED
C
Ethernet ports 1–4
3
WiFi LED
Ethernet cable
Power adapter
(varies by region)
Troubleshooting
For regulatory compliance information including the EU Declaration of Conformity,
visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference
purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
November 2021
If you’re having problems with the installation, try the following:
• Turn off your modem and router and disconnect them. Reboot your
modem. Reconnect your router to your modem and try installing with the
Nighthawk app again.
• If you’re still unable to install your router using the Nighthawk app,
manually install it using the router web interface.
Visit http://www.routerlogin.net to access the router web interface.
If you already own another NETGEAR router and you used the Nighthawk app
before, go to the dashboard and tap > NEW SETUP to install your new router.
For more information, visit netgear.com/routerhelp.
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Support and Community
Regulatory and Legal
To Previous Page
Loading...
Need help?
General
