Disks
31
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems
The disk tray is secured in the drive bay.
9. If necessary, turn on your system by pressing the Power button.
If the disk that you added was not previously formatted, the system uses the disk in one
of the following ways:
• If you are adding the disk to a system that uses X-RAID2, the system automatically
determines whether the disk is used for protection or storage.
The new disk is
incorporated in the background while you continue to use your system.
• If you are adding the disk to a system that uses Flex-RAID, the disk becomes
available for use.
You use the local admin page to manually configure the new disk.
For more information about X-RAID2, Flex-RAID, and using the local admin page, see
the ReadyNAS OS 6 Software Manual, which is available at
http://support.netgear.com/product/ReadyNAS-OS6.
To Next Page
Loading...
