Maintenance
40
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems
Access the Inside of the Storage System
You must access the inside of the system to replace a fan or on-board battery.
WARNING:
Ensure that the chassis cover is in place when the system is
operating to allow proper cooling. If you do not strictly follow this
practice, out-of-warranty damage to the system can occur.
ļ To access the inside of a 2120:
1. If your system is mounted in a rack, grasp the two handles on either side and pull the
system straight out until it locks.
The system is locked when you hear a click sound.
2. Remove the four screws holding the top cover in place.
3. Slide the top cover back.
To Next Page
Loading...
