To Next PageTo Next Page
Need help?Do you have a question about the NETGEAR ReadyNAS 312 and is the answer not in the manual?
General| Processor cores | 2 |
|---|---|
| Processor model | - |
| Processor family | Intel Atom® |
| Processor frequency | 2.1 GHz |
| Number of processors installed | 1 |
| RAID levels | 0, 1, 5, 6, 10, JBOD |
| Storage drive size | 2.5/3.5 \ |
| Hot-swap drive bays | Yes |
| Storage drive capacity | 2000 GB |
| Supported file systems | ext3, ext4, FAT32, HFS+, NTFS |
| Storage drive interface | Serial ATA |
| Total installed storage capacity | 4 TB |
| Maximum supported storage capacity | 8 TB |
| Internal memory | 2 GB |
| Wi-Fi | No |
| Cabling technology | 10/100/1000Base-T(X) |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Fiber ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 25 dB |
| Number of users | 8192 user(s) |
| Security algorithms | 256-bit AES |
| Chassis type | Mini Tower |
| Product color | Black |
| Number of fans | 1 fan(s) |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 51 W |
| Power supply unit (PSU) capacity | 60 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 101 mm |
| Height | 142 mm |
| Weight | 2220 g |
Information on software manual and community website for ReadyNAS products.
Guidelines for choosing a suitable environment for the ReadyNAS storage system.
Lists compatible operating systems for the ReadyNAS storage system.
Lists browsers compatible with the ReadyNAS local admin page.
Instructions for adding disks to a system without pre-installed drives.
Details physical components on the front and side of a representative ReadyNAS model.
Illustrates and describes the drive bay configuration of a representative ReadyNAS model.
Shows and labels the ports and connectors on the rear of a representative ReadyNAS model.
Explains the meaning of indicator LEDs and status indicators on a representative ReadyNAS model.
Describes how to power the system on and the preferred shutdown methods.
Introduces the boot menu and its available modes for troubleshooting.
Describes disk tray features, compatibility notes, and mounting instructions.
Specifies requirements for using SATA HDDs and SSDs, and where to find compatibility lists.
Instructions on using and reformatting previously used disks with the ReadyNAS system.
Step-by-step guide for adding 3.5-inch and 2.5-inch HDDs or SSDs to the system.
Procedures for replacing failed HDDs or SSDs, including hot-swap instructions.
Lists the default IP address, user name, password, and network settings.
Details the general, physical, electrical, and environmental specs for the ReadyNAS 102.
