12
A message displays confirming that the extender is connected to the
WiFi network.
10. Click the Finish button.
11. Unplug the extender and move it to a new location closer to the area
with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
12. Plug the extender into an electrical outlet.
The Power LED lights green. If the Power LED does not light, press
the Power On/Off button.
Use the Link Rate LEDs to help you choose a spot where the
extender-to-router connection is optimal.
To Next Page
Loading...
