16
My router security is WEP, and I entered the wrong passphrase
or security key on the extender. I cannot access the extender
anymore. What can I do?
The extender cannot check to see if the WEP passphrase is correct. If you
entered the wrong passphrase, your wireless device is not able to get the
IP address from the extender. You must reset the extender to its factory
default settings to get the IP address back.
How do I restore the extender to its factory default settings?
1. Use a sharp object such as a pen or paper clip to press and hold the
Factory Reset button on the extender for at least five seconds until
the Power LED blinks amber.
2. Release the Factory Reset button and wait for the extender to
reboot.
The extender resets and returns to the factory default settings.
You can now access the extender from your web browser using the
factory default settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
