ReadySHARE Access
Once you have set up your router or gateway, you can connect
most common USB storage devices and share the contents with
other users (both wired and wireless) on your network. (If your USB
device requires special drivers, it will not be compatible.).
You can access your USB device as follows:
• On Windows systems, use any of these methods:
- Select Start > Run and enter \\readyshare in the dialog
box. Click OK.
- Open Explorer or Safari and enter \\readyshare in the
address bar.
- Open My Network Places and enter \\readyshare in the
address bar.
To Next Page
Loading...
