Advanced Settings
81
N300 Wireless Router WNR2000v4
IMPORTANT:
The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
4. Click the Apply button.
Set Up a Wireless Schedule
You can use this feature to turn off the wireless signal from your router at times when you do
not need a wireless connection. For instance, you could turn it off for the weekend if you
leave town.
To configure and enable the wireless schedule:
1. Select Advanced >
Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
2. Click the Add a new period button.
The screen adjusts:
3. Use the menus, radio buttons, and check boxes to set up a period during which you want
the wireless signal to be turned off.
4. Click the Apply button.
The Advanced Wireless Settings screen displays.
To Next Page
Loading...
Need help?
General
