18
6. Connect your wireless client (laptop, tablet, or smartphone) to
the XAVN2001 for Internet access.
• Option 1: Use the WPS button on your wireless client to
automatically connect to the XAVN2001 access point.
a. Press and hold the Security button on the XAVN2001 for
2 seconds and release it.
The Wireless LED starts to blink.
b. Press the WPS button on your wireless client for 2
seconds and release it.
When the Wireless LED stops blinking, your wireless
client is automatically connected to the XAVN2001
access point and you can surf the web.
• Option 2: Manually connect to the XAVN2001 access point.
On your computer or wireless client (tablet, smartphone):
a. Open the software that manages your wireless network
connections.
b. Connect to the XAVN2001 wireless network (SSID).
c. Enter the network key (passphrase).
Your wireless device is now connected to the XAVN2001
access point and you can surf the web.
To Next Page
Loading...
Need help?
General