NetGear® Zing Instructions 9-2015 pg. 1
Getting Up and Running With Your NetGear® Zing Mobile Hotspot™
Your NetGear® Zing Mobile Hotspot™ has been activated and tested, by SFL Broadband staff, prior to being shipped. By
following the instructions below, you should be able to easily prepare, and connect to, the hotspot to begin accessing
the internet for educational purposes. Up to 8-10 wireless computing devices (depending on usage) can be connected
to the NetGear® Zing mobile hotspot at one time. The user of each wireless computing device that will be connecting to
the hotspot will need to be provided with the device name (below) and password (below). (Note, this can be a one-time
set-up process; the computing device will recognize the hotspot in the future and automatically connect to it.)
I. Insert the charged battery, or plug the hotspot into an electrical outlet. (The battery compartment is on the
back of your device.)
To Next Page
Need help?
General
