Netis DL4323 User Manual

ADSL2+ Modem Router User Manual
52
Type: the type of this mapping rule. It can be “One-to-One”,
“Many-to-One” ,“Many-to-Many” and “One-to-Many”.
 One-to-One: one local IP will be mapped to one global IP
 Many-to-One: the IP between “Local Start IP” and “Local End IP” will be mapped to
a global IP
 Many-to-Many: the IP between “Local Start IP” and “Local End IP” will be mapped
to the IP between “Global Start IP” and “Global End IP”
 One-to-Many: one local IP will be mapped to any of the IP between “Global Start
IP” and “Global End IP”
Local Start IP: a local IP address
Local End IP: a local IP address
Global Start IP: a global IP address used for NAT
Global End IP: a global IP address used for NAT
4.3.3 QoS
Router provides a control mechanism which serves traffic with different priority. The traffic
is classified by criteria. A classification rule contains three configuration blocks: Qos policy,
schedule mode and traffic rule. The Qos policy enables you to classify packet on the basis of

Netis DL4323 Specifications

General

Brand	Netis
Model	DL4323
Category	Modem
Language	English