Need help?Do you have a question about the Netis WF2409E and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| High power | - |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Rack mounting | No |
| Ethernet LAN (RJ-45) ports | 5 |
| Antennas quantity | 3 |
| Security algorithms | WPA-PSK, WPA2-AES, WPA2-PSK, WPA2-TKIP |
| Product color | White |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 41 mm |
|---|---|
| Width | 58 mm |
| Height | 145 mm |
| Weight | 151 g |
Configure your computer's wired network adapter to obtain an IP address automatically or use DHCP.
Open a web browser and enter 192.168.1.1 to access the router's web management interface.
Select Internet Connection Type and configure wireless network name (SSID) and password.
Press and hold the Default button on the rear panel for 8-10 seconds to reset the router to factory defaults.
Check connections, settings, reboot devices, or test direct modem connection for internet access problems.
To Next Page
