To Next PageTo Next Page
Need help?Do you have a question about the Netis WF-2409 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Range | 2.4 GHz |
| Wireless Speed | Up to 300 Mbps |
| Ethernet Ports | 4 x 10/100Mbps LAN, 1 x 10/100Mbps WAN |
| Wireless Security | WPA/WPA2 |
| Button | RESET |
| Antenna | 2 x 5dBi external antennas |
Details compliance with FCC rules for digital devices and potential interference.
Outlines compliance with FCC RF radiation exposure limits and operating conditions.
Provides a comprehensive overview of the WF-2409 Wireless-N Router's capabilities and features.
Lists the key functionalities and standards supported by the WF-2409 router.
Identifies and explains the function of each LED indicator and port on the router's front and rear panels.
Describes the procedures to reset the router to its original factory default settings.
Provides step-by-step instructions for physically connecting and setting up the router hardware.
Steps to prepare your computer for router access by configuring network settings.
Details the process of accessing the router's web-based configuration utility.
Provides status information and detailed configuration of the router.
Offers a simplified method to configure the router for internet access.
Configures the router to obtain an IP address automatically from the ISP using DHCP.
Configures the router to connect to the Internet using PPPoE credentials provided by the ISP.
Configures the router with a static IP address, subnet mask, gateway, and DNS server.
Configures PPTP client connection using static IP details provided by the ISP.
Configures L2TP client connection using static IP details provided by the ISP.
Enables or disables the wireless function and sets basic wireless parameters like SSID and security.
Guides on setting up a secure wireless network using Wi-Fi Protected Setup (WPS) via PIN or PBC.
Manages all wireless settings including basic, security, MAC filtering, WDS, and advanced options.
Configures encryption methods (None, WEP, WPA, WPA2) for wireless network protection.
Configures various security features like IP/MAC binding, filtering, and domain blocking.
Provides tools for firmware management, password changes, backup, and reboot.
Allows changing the default router login username and password for enhanced security.
Resets all router settings to their original factory defaults.
