WF-2409 User Manual
4.10.1. Firmware
Click "Browse..."button and select a File to upgrade, after you have selected the appropriate file,
click "Upgrade" button to execute upgrade procedure. Do not cut off the power supply during
the process of upgrading.
Figure 4-61
4.10.2. Password
The default username/password is guest/guest. To ensure the Router’s security, it is suggested
that you change the default password to one of your choice, here enter a new password and then
Re-enter it again to confirm your new password. Click “Save” button to save settings.
Figure 4-62
4.10.3. Parameters Backup
Here you can Backup and Recovery system Configuration Parameter
69
To Next Page
Loading...
