Netis WF-2409 - Wireless Advanced

WF-2409 User Manual
Figure 4-41
AP3:
¾ Select radio mode is ‘REPEATER’in wireless base of AP3.
¾ Click ‘AP Scan’ in wireless base of AP3 ,and select ‘Netis1’ and Connect , then the
‘Repeater SSID’ and ‘Channel’ become same as AP2.
¾ The IP address of AP3 should be 192.168.1.x (1<x<255),but different from AP2.
¾ Select ‘Network’-‘DHCP ’ ,select disable DHCP server.
4.5.6. Wireless Advanced
These settings are only for more technically advanced users who have a sufficient knowledge
about wireless LAN. These settings should not be changed unless you know what effect the
change will have on your AP.
54