WF-2409 User Manual
**-**-**-**-**-**（e.g.: 00-22-33-da-cc-bb）
Follow the following steps to set MAC filter:
1. Enable MAC Filter, then select save.
2. Add MAC address you want to control in the “MAC address” field (the format is
**-**-**-**-**-**), then click “Add” button, and you will see the MAC address has displayed
in the MAC list. Or you can import IP/MAC bind list.
3. There are two items supplied, “Permit through the router for MAC address listed,others are
denied” and “Deny through the router for MAC address listed,others are permitted”, Select the
item you want, and click “Save” button.
4.8.4. Domain Filtering
Figure 4-54
¾ Status: the default is disable. “Domain filter” is able to filter certain domain name such
as www.sina.com
.
¾ Rule: you can select permit or deny. The default is permit.
¾ Source Host: input the source IP address that you want to control. you can select “all
Host”,”Specific Host”,”Host subnet” or “HOST IP section”
¾ Priority: define the priority of this Rule
¾ DNS Filter Key words: Input website name or Domain name in the “DNS Key Words”
64
To Next Page
Loading...
Need help?
General
