WF-2409 User Manual
field, such as www.163.com.
Follow these steps to set Domain filter:
1. You can select “enable” and click “Save” to enable “Domain Filter” function. This is only the
first step, you should continued to create appropriate rules for “Domain Filter”.
2. Input DNS Filter Key words.
3. There are two items supplied, “Permit through the router for DNS Key words listed, others
are denied” and “Deny through the router for DNS Key words listed, others are permitted”,
Select the item you want, and click “Save” button.
4. If you want to delete certain item on the list, select appropriate item on the list, click “delete”
to delete it.
4.9. Advance
4.9.1. Static Routing
Most of router and wireless router are using NAT mode, so this feature is designed for most
common network environment.
Figure 4-55
¾ IP Address: Specify a certain IP address which static route forward to.
¾ Subnet Mask: Subnet mask is used for distinguish Network portion and Host portion for an
IP address.
¾ Next-hop IP Address: This is an IP address of the next-hop device (and also is the gateway
65
To Next Page
Loading...
Need help?
General
