WF-2409 User Manual
Figure 4-2
¾ Connection Type: Display router’s current connection type, It should be one of “PPPoE”,
“DHCP”, “Static IP”, depending on what kind of connection type your ISP provides.
¾ MAC Address: The physical address of WAN port, this is a unique address assigned by
manufacturer.
¾ IP Address: The IP address you obtained after connect to the Internet, if you haven’t
connected to the Internet yet, this field is 0.0.0.0.
¾ Mask: The Subnet mask you obtained after connect to the Internet, if you haven’t
connected to Internet yet, this field is 0.0.0.0
¾ Gateway: The IP address of Default gateway you obtained after connect to the Internet, if
you haven’t connected to Internet yet, this field is 0.0.0.0.
¾ Primary DNS: The DNS server translates domain or website names into IP address, input
the most common DNS server address you used or provided by your ISP.
¾ Secondary DNS: Input IP address of a backup DNS server or you can leave this field blank
¾ Link Status: Display router’s current connection Status
¾ Connected time: Display the time since router have connectted to the Internet
4.1.3. LAN Info
This item provides information about router’s LAN port, display LAN port’s physical address,
IP address and current data status about receiving and sending
28
To Next Page
Loading...
