Need help?Do you have a question about the Netis WF2501 and is the answer not in the manual?
General| VPN support | PPTP, L2TP, IPSEC |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 150 Mbit/s |
| Rack mounting | No |
| Frequency band | 2.4 GHz |
| Frequency range | 2.4 - 2.4835 GHz |
| Ethernet LAN (RJ-45) ports | 5 |
| DHCP client | - |
| Antennas quantity | 1 |
| Antenna gain level (max) | 5 dBi |
| Security algorithms | 128-bit WEP, 64-bit WEP, SSID, WPA-PSK, WPA2-PSK |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Grey, White |
| LED indicators | LAN, Power, WAN |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 99 mm |
|---|---|
| Width | 133 mm |
| Height | 27 mm |
| Weight | 149 g |
Detailed overview of the WF2501/WF2502 router's capabilities and design.
Lists the key functionalities and specifications of the router.
Outlines the wireless and wired standards the router supports.
Specifies the operating and storage conditions for the router.
Lists the minimum hardware and software requirements for installation.
Identifies and describes the router's front and rear panels and LEDs.
Explains how to reset the router to its default factory settings.
Provides step-by-step instructions for physically connecting and installing the router.
Guides on configuring computer's network settings for router access (Win XP, Vista, 7, Mac OS).
Details how to use the 'ping' command to check router connectivity.
Instructions on how to log in to the router's web-based configuration utility.
Displays current router version, WAN, LAN, Wireless, Router status, and traffic statistics.
Simplifies internet connection setup via DHCP, PPPoE, Static IP, and Wireless.
Configures Wi-Fi Protected Setup for secure wireless network creation.
Configures WAN (Wired/Wireless Access) and LAN parameters, Port Settings, and IGMP Proxy.
Manages wireless status, SSID, security, MAC filtering, WDS, advanced options, and statistics.
Manages DHCP server status, IP address assignment, and address reservation.
Configures Virtual Servers, Port Triggering, DMZ, and UPnP for traffic management.
Implements VPN security, IP filtering, MAC filtering, and domain filtering.
Configures static routes for network traffic forwarding.
Manages Quality of Service rules for bandwidth prioritization.
Enables domain name access to the internet via DDNS services.
Manages firmware upgrades, time settings, password, WOL, and system logs.
Provides company information and product overview.
Steps to resolve issues accessing the router's web interface via Ethernet.
Procedure to reset the router to factory defaults if the password is lost.
Troubleshooting steps for problems connecting with a cable modem.
Steps to diagnose and fix issues when the router is accessible but internet access fails.
Solutions for when wireless clients cannot communicate with other devices.
Explains how to use the router in different modes like AP, WDS, Client, and Repeater.
To Next Page
