Need help?Do you have a question about the Netis WF-2404 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Networking standards | IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| Rack mounting | No |
| Ethernet LAN (RJ-45) ports | 5 |
| DHCP server | - |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA2, WPS-PBC, WPS-PIN |
| Antennas quantity | 2 |
| Antenna gain level (max) | 5 dBi |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | White |
Weight and Dimensions| Depth | 183 mm |
|---|---|
| Width | 125.2 mm |
| Height | 30.72 mm |
| Weight | - g |
Details equipment compliance with FCC rules and RF exposure limits for residential installations.
Highlights safety warnings and user responsibilities regarding modifications to the equipment.
Lists the items included in the product package for user verification.
Provides copyright information and trademark details for Netis Corporation.
Offers contact information for technical assistance in the USA and Canada.
Describes the router's capabilities, key features, and functionalities.
Details supported standards, protocols, and operating conditions.
Outlines minimum requirements and describes router panel components.
Explains how to reset the router and the steps for physical installation.
Guides on configuring computer network settings for router access.
Explains how to check connection and log into the router's web interface.
Displays the current status and detailed information of the router.
Shows router versions and WAN connection status.
Provides status information for LAN, Wireless, and System resources.
Presents statistics on the bits the router sends and receives.
Offers a simple method for configuring internet access via DHCP.
Details PPPoE and Static IP connection setup using ISP credentials.
Configures wireless settings and MAC address cloning for ISP requirements.
Enables WPS for secure network setup and guides on adding new wireless devices.
Describes different methods (PIN, PBC) to connect wireless adapters using WPS.
Explains configuration for wired internet access, including IP, Subnet Mask, Gateway, and MTU.
Explains configuration for wireless WAN access, including SSID, Authentication Type, and IP settings.
Covers LAN IP address settings and default subnet mask.
Configures MAC address cloning and port settings for WAN/LAN interfaces.
Enables or disables the IGMP Proxy feature.
Provides basic configuration items for the wireless network.
Covers security modes, with a focus on 'None' encryption.
Configures WEP encryption with different key lengths and modes.
Details WPA-PSK, WPA2-PSK, and mixed mode encryption for enhanced security.
Allows filtering wired users by MAC address for network access control.
Configures WDS or AP+WDS mode for wireless bridging.
Configures the router to relay, amplify, and extend wireless signals.
Provides advanced wireless LAN settings for technically advanced users.
Displays current status of wireless clients associated with the AP.
Enables or disables secondary APs for extended wireless coverage.
Configures DHCP server settings and displays a list of assigned IP addresses.
Allows reserving specific IP addresses for physical host devices.
Configures virtual servers to map external ports to internal IP addresses and ports.
Dynamically registers virtual server rules based on trigger protocol and port.
Opens all ports of a computer to the Internet for specific purposes like online gaming.
Enables UPnP for automatic port forwarding and FTP port mapping.
Covers security settings, including VPN pass-through options.
Allows filtering network access based on source IP addresses and ports.
Filters network access based on MAC addresses.
Filters access to websites based on domain names or keywords.
Configures static routes for network traffic forwarding.
Manages Quality of Service settings for bandwidth control.
Configures Dynamic DNS service for accessing the router via a domain name.
Provides system tools like firmware upgrade and time configuration.
Covers password management, Wake-On-LAN, and system log examination.
Enables remote management and explains factory default restoration.
Provides instructions on how to restart the router.
Provides information about the Netis company and its products.
Offers solutions for common problems encountered with the router.
Troubleshoots issues accessing the router's configuration utility via Ethernet.
Provides instructions for password reset and cable modem connection issues.
Addresses issues where the router is accessible but internet access fails.
Solves problems with wireless clients communicating with other devices on the network.
To Next Page
