WF-2409 User Manual
¾ IP Address
The Local IP address that your Internet access into Subnet mask
¾ Subnet mask
Specify a Subnet Mask for your WAN segment
¾ Default gateway
It is provided by your ISP
¾ Primary DNS
DNS server is used for resolve domain name. Your ISP will provides you with at least one DNS
IP address, input IP address of your DNS server in this field
¾ Secondary DNS
Input IP address of backup DNS server, or you can leave this field blank
¾ User Name
Iput User name your ISP provides
¾ Password
It is provided by your ISP
4.2.6. Wireless Configuration
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default
setting is “enable”. If you chose the “Disable” status, the router will become a wired router
without wireless function, so be careful when you choose this status.
Figure 4-13
You can choose “Enable” or “Disable” to enable or disable the wireless function. The default
setting is ”enable”. If you chose the “Disable” status, the router will become a wired broadband
router without wireless function, so be careful when you choose this status.
¾ SSID
SSID (Service Set Identifier) is your wireless network's name shared among all points in a
wireless network. The SSID must be identical for all devices in the wireless network. It is
case-sensitive and must not exceed 32 characters. Make sure all points in the wireless network
have the same SSID. For added security, you should change the default SSID to a unique name
¾ Security
35
To Next Page
Loading...
Need help?
General
