WF-2409 User Manual
1. You can select “enable” and click “Save” to enable “IP Address Filtering” function. This is
only the first step, you should continued to create appropriate rules for “IP Address Filtering”.
2. Input description information for current access control rule in the “Description” field. Input
IP address of host you want to restrict.
3. There are two items supplied, “Permit through the router for IP address listed, others are
denied” and “Deny through the router for IP address listed,others are permitted”, Select the
item you want, and click “Save” button.
4. If you want to delete certain item on the list, select appropriate item on the list, click “delete”
to delete it.
4.8.3. MAC Filtering
Figure 4-53
¾ Status: the default is disable. You can filter wired users by enabling this function; thus
unauthorized users can not access the network.
¾ MAC address add mode: You can select Manual add or Import IP/MAC bind list
¾ Rule name: describe MAC Filter list to tell from different MAC Filter lists
¾ Rule: you can select permit or deny. The default is permit
¾ MAC address: input the MAC address that you want to control. The default format is
63
To Next Page
Loading...
Need help?
General
