Need help?Do you have a question about the Netis WF2411E and is the answer not in the manual?
Configure your computer's wired network adapter to obtain an IP address automatically (DHCP).
Open a web browser and enter the router's IP address (192.168.1.1) to access the management page.
Choose connection type (DHCP, Static IP, PPPoE) and configure wireless SSID and password.
Use a pin to press and hold the Default button on the rear panel for 8-10 seconds to reset the router.
Check connections, verify settings, reboot devices, or try direct modem connection.
Device compliance with FCC radiation exposure limits and operating conditions.
Details Industry Canada compliance for digital apparatus and radio transmitters.
Configure your computer's wired network adapter to obtain an IP address automatically (DHCP).
Open a web browser and enter the router's IP address (192.168.1.1) to access the management page.
Choose connection type (DHCP, Static IP, PPPoE) and configure wireless SSID and password.
Use a pin to press and hold the Default button on the rear panel for 8-10 seconds to reset the router.
Check connections, verify settings, reboot devices, or try direct modem connection.
Device compliance with FCC radiation exposure limits and operating conditions.
Details Industry Canada compliance for digital apparatus and radio transmitters.
General| Brand | Netis |
|---|---|
| Model | WF2411E |
| Category | Network Router |
| Language | English |
To Next Page
