Need help?Do you have a question about the Netis WF2322 and is the answer not in the manual?
General| 5 GHz | No |
|---|---|
| 2.4 GHz | Yes |
| Modulation | - |
| Frequency band | 2.4 - 2.4835 GHz |
| Number of users | - user(s) |
| Channels quantity | - channels |
| Transmitting power | 30 dBmW |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Receiver sensitivity | -99dBm |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 300 Mbit/s |
| Supported network protocols | PPPoE, Static IP, L2TP, PPTP, WISP, DNS, PSE |
| Certification | FCC, CE |
| Product color | White |
| LED indicators | LAN, Power, WLAN |
| International Protection (IP) code | IP55 |
| WAN connection | Ethernet (RJ-45) |
| Ethernet LAN (RJ-45) ports | 2 |
| Security algorithms | 128-bit WEP, 64-bit WEP, AES, SSID, TKIP, WDS, WPA-PSK, WPA2-PSK |
| Antenna features | Integrated antenna |
| Antenna gain level (max) | 10 dBi |
| Output current | 0.5 A |
| Output voltage | 24 V |
| Storage temperature (T-T) | -30 - 80 °C |
| Operating temperature (T-T) | -30 - 70 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Steps for connecting the device in Client or WISP modes, involving PoE injector setup.
Guide to assigning a static IP address to your PC for router configuration.
Steps to restore the netis WF2322 to its factory default settings.
Troubleshooting steps for resolving internet connectivity problems.
FCC statement on interference limits and user responsibilities for compliance.
FCC statement regarding RF exposure limits and safe operating distances.
To Next Page
