Netis WF2322 - Configure AP Router via Web Management; Set Static IP for PC

3
When device works in AP/AP Router mode,
1. Connection step
A) ~ C) is same as above
D) Connect the Ethernet cable into LAN/WAN port of PoE injector and the other end to the Ethernet port
of xDSL or Cable modem/router.
E) Re-place the small cover back to the device
For step B) to E)
netis Wireless High Power Outdoor AP Router Quick Installation Guide
LAN/WAN
LAN/WAN
TO Switch or PC
Ethernet Cable
Main Electrical Supply
INDOOR
Power Cable
PoE Injector
POWER
LAN/WAN
WISP Mode
ISP