Need help?Do you have a question about the Netis WF2375 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Receiver sensitivity | -98 dBm |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 433 Mbit/s |
| WLAN data transfer rate (first band) | 150 Mbit/s |
| Transmit power | 20 dBmW |
| Antennas quantity | 1 |
| Antenna gain level (max) | 11 dBi |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK |
| USB port | No |
| Ethernet LAN (RJ-45) ports | 2 |
| Product type | Tabletop router |
| Product color | White |
| LED indicators | LAN, Power, WAN |
| Output current | 0.5 A |
| Output voltage | 24 V |
| Power source type | DC, PoE |
| Certification | FCC, CE |
| Storage temperature (T-T) | -30 - 80 °C |
| Operating temperature (T-T) | -30 - 70 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
Steps for connecting the device in Client or WISP mode.
Steps for connecting the device in AP/AP Router mode.
Manually set the IP address for your computer to access the router.
Steps to open the browser, enter the IP address, and log in to the router.
Details on selecting PPPoE, DHCP, or Static IP for AP Router mode.
Steps to select target network, security info, and connection type for WISP mode.
Setting up SSID, security, and password for wireless network.
Displaying the management page and reverting PC network settings.
How to reset the device to factory default settings using the reset button.
Steps to troubleshoot issues when the internet connection is not available.
To Next Page
