EasyManuals Logo

Netis WF2375 User Manual

Netis WF2375
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
WISP Mode :
Select target network and Connection Type.
1. Click “AP Scan” button to select your target network and click “Connect” button.
2. Type in the wireless security info of the target network.
3. Select connection type. (Please refer to “Internet SettingsAP Router Mode)
6
Note: The DHCP Server will be disabled after switching to “AP” mode successfully, so you will have
to set a static IP address for your PC first if you need to login to the web-based management page again.
3.4 The web management page will display after login successfully. Select the language as you need
on the top box, default is in English.
Wireless Settings
Setup a wireless network name in “SSID” box, it is recommended to use WPA-PSK/WPA2-PSK for
Security” and set a wireless network key in the “Password” box, then click “Save” button.
3.5 When you completed the configuration,please remember to change the settings on your computer
back to to 'obtain an IP address automatically' in the the same window as step 3.1.
netis Wireless High Power Outdoor AP Router Quick Installation Guide

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Netis WF2375 and is the answer not in the manual?

Netis WF2375 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Receiver sensitivity-98 dBm
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)433 Mbit/s
WLAN data transfer rate (first band)150 Mbit/s
Transmit power20 dBmW
Antennas quantity1
Antenna gain level (max)11 dBi
Security algorithms64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK
USB portNo
Ethernet LAN (RJ-45) ports2
Product typeTabletop router
Product colorWhite
LED indicatorsLAN, Power, WAN
Output current0.5 A
Output voltage24 V
Power source typeDC, PoE
CertificationFCC, CE
Storage temperature (T-T)-30 - 80 °C
Operating temperature (T-T)-30 - 70 °C
Operating relative humidity (H-H)0 - 90 %

Related product manuals