14-24 User’s Reference Guide
Follow these steps to configure the new packet filter set:
1. Select Filter Set Name and enter a descriptive name for the filter set.
2. To change the forwarding action of filters in the filter set, select Show Filters/Change Action on Match
and press Return to go to the Show Filters/Change Actions on Match screen.
Select a filter and toggle the packet forwarding action to Yes (pass) or No (discard).
Add Packet Filter Set
Filter Set Name:
Show Filters/Change Action on Match...
Append Filter...
Remove Filter...
ADD FILTER SET NOW CANCEL
Configure an IPX Filter Set here. You must ADD FILTER SET NOW to save.
Show Filters/Change Actions on Match
Filter Name---------------------Forward
Filter 1 No
Filter 2 No
<<NO MATCH>> Yes
Set whether filters forward or drop matching packets here.
To Next Page
Loading...