Netopia R2020 - Security Authentication Components; Configuring for Security Authentication

Security 14-37
The Netopia R2020 supports the following user configurations for security authentication:
■ Single user, calling a single destination (single session)
■ Single user, calling multiple destinations (two simultaneous and separate sessions)
■ Multiple users, calling a single destination (single session)
■ Multiple users, calling multiple destinations (two simultaneous and separate sessions
Security authentication components
To properly identify and authenticate an authorized user, the following are required:
■ A secret personal identification number (PIN) for each user.
■ A security authentication token card.
■ A Security Access Control Module (ACM).
Note: The Netopia R2020 currently only supports Ascend routers as ACMs.
■ An external Netopia R2020 calling into a designated server. For example, a telecommuter dialing into a
remote site from a Netopia R2020 interested in accessing personal email or file sharing services.
Note: The Netopia R2020 does not include a security authentication token card.
Configuring for security authentication
To configure the Netopia R2020 to support security authentication, select an authentication method and set up
a designated connection profile from the System Configuration screen or your first connection profile from Easy
Setup.
1. From the WAN Configuration menu, select Display/Change Connection Profile. From the pop-up menu that
appears, select a Connection Profile. In the Connection Profile screen select Datalink Options.
Main
Menu
WAN
Configuration
Display/Change
Connection Profile
Datalink Options