Netopia R2020 - Connecting to an Ethernet Network; 10 Base-T

Connecting Your Local Area Network 4-3
Connecting to an Ethernet network
The Netopia R2020 supports Ethernet connections through its eight Ethernet ports. The Router automatically
detects which Ethernet port is in use.
10Base-T
You can connect a standard 10Base-T Ethernet network to the Netopia R2020 using any of its available
Ethernet ports.
Netopia R2020 back panel
The Netopia R2020 in a 10Base-T network
8
Ethernet
Normal/Uplink
Auxiliary Console Power
4
7
3
6
2
5
1
Line 2 Line 1
1
Ethernet
Nor-
8
1
To connect your 10Base-T network to the Netopia
R2020 through an Ethernet port, use a 10Base-T
cable with RJ-45 connectors.
If you have more than eight devices to connect,
you can attach additional devices using another
10Base-T hub.