8-2 User’s Reference Guide
■ You can enter a PBX or Centrex Dialing Prefix such as “9” if you are on a PBX or Centrex phone system and
require a prefix for an outside line.
■ Enter the optional telephone or Directory Numbers for the two onboard modems to provide the Netopia
R2020 with the information needed to establish a two-channel call using MP or BAP. This will advise the
remote side of an inbound data call how to connect to a second channel.
Note: When placing multi-channel calls, the answering equipment must either:
■ be in a “hunt group,” where a single telephone number services multiple lines, or
■ the answering side must implement MP or BAP as a method to advise the calling side what number(s)
to use.
ISPs or corporate IS groups will meet these conditions. For other non-standard dialup connections, you
should verify that one or the other of these conditions is true.
■ You may choose to selectively Answer inbound calls, based on a distinctive ring pattern, on each onboard
modem. This permits you to set up a party line configuration where a fax machine or other device shares
Internal Modem Configuration
Modem Dialing Prefix: ATDT
PBX Dialing Prefix:
Line 1 Directory Number:
Answer on Ring Type... Any
Line 2 Directory Number:
Answer on Ring Type... Any
Speaker On... Always
Speaker Volume... 2-Medium
Aux Serial Port... Async Modem
Data Rate (kbps)... 57.6
Aux Modem Init String: AT&F&C1&D2E0S0=1
Aux Modem Directory Number:
Enter the dialing prefix to be sent to all modems.
Enter Information supplied to you by your telephone company.
To Next Page
Loading...