What to do if NETSPA ASPEN Hot Tub water is not clean?
If your NETSPA Hot Tub's water isn't clean, try these steps: * Increase the filtering time. * Clean or replace the filter cartridge. * Change the pool water completely. * Refer to the chemical manufacturer’s instructions for proper water treatment.
Why NETSPA Hot Tub pump does not heat properly?
If the NETSPA Hot Tub pump isn't heating properly: 1. Increase the set temperature. 2. Clean or replace the filter cartridge. 3. Ensure the water level is at least at the minimum.
What to do if NETSPA Hot Tub bubble massage system does not work?
If the NETSPA Hot Tub bubble massage system isn't working, it could be due to a few reasons. First, the pump may be overheating; if so, cut off the power and let it cool down. Alternatively, the auto shut-down feature (30min) might be activated; press the bubble button to reactivate it.
What to do if NETSPA ASPEN has pump leakage?
If you notice a pump leakage in your NETSPA Hot Tub, first replace the seal in the correct position. If water is leaking from the pump body, check the pump body.
How to fix NETSPA Hot Tub pool leakage?
If your NETSPA Hot Tub pool is leaking because it's torn or punctured, use the provided repair kit.
Critical safety warnings regarding drowning, injury, and electric shock risks.
General warnings for safe operation, electrical precautions, and child safety.
Overview and explanation of the spa's control panel buttons and display functions.
A guide to diagnosing and resolving common problems encountered with the spa's operation.
Explanation of various error codes displayed by the spa and their corresponding solutions.
General| Voltage | 240V |
|---|---|
| Capacity | 5-6 people |
| Maximum Temperature | 42°C |
| Power Supply | 240V |
| Cover | Included |
| Air Blower | Integrated 650W |
To Next Page
